Episode Details

Welcome James Adams, Chris Boross, Liam Fraser, and Luke Wren!

• The last time the RPi team was on the show was about the RP1 (#648)
• The order of parts being released was RP2040->RP1->RP2350
• Check out the datasheet for the RP2350
• Learning from silicon
• Security and power states
• The part is a “Dual dual core”
• The Arm side is a Dual M33
• The RISC V side is a Hazard 3 processor, designed by Luke based on a previous processor called the Hazard 5
• HB5
• There is a mux on the core and you select which side you’re going to use at boot
• There are 48 GPIO (but users always want more)
• Chris Boross (first time on the show) is on the commercial team. He’s seing interesting applications for the RP2350 including devices that are using it for motor control.
• They also have seen the part used in satellites because mRAM or masked ROM is less susceptible to radiation errors
• The PIOs have changed, but are more evolutionary from the RP2040
• The PIO allows you to create state machines that process inputs without processor interventions, basically like tiny cores
• 2 cores – 8 total
• Interesting PIO applications
  • Luke still likes that DVI on 2040 that was discussed on the first episode they were on (#529)
  • CAN is possible
  • USB host / device
  • MII / RMII
  • ULPI – USB 2.0 Phy
• The core frequency only increased 133 MHz -> 150 MHz. There is tougher timing with the M33
• LVT – lower voltage threshhold
• 30 -> 40 pins
• There are now variants listed on the RP2350 product page (but not in mass production) that include flash in the SOM package
• RP2040 was one power domain
• “Powerman” (and of course AVR Man)
• Switched core
• AON – always on
• 32 kHz

• Listen Now